Homeowner Forum / Security Alarms / October 2008

Hello ASA folks, I'm new here.
I am in the initial stage of planning the pre-wiring for a new home.  I
have just spent several days going through the last several years of ASA
postings, so I believe that I have a fair appreciation for the controversy

How do I go about defaulting the dealer code on the Napco Gemini P800? I
think it's locked out. Thanks.

http://www.bh11.com/images/yuma%20map2.jpg
http://www.bh11.com/land.html

Los Angeles Locksmith provides fast, reliable, professional 24 Hour
Emergency Locksmith  services at extremely competitive rates.
We Unlock Autos, Homes, and Businesses
Get reimbursed for lockouts if you have roadside assistance

Graham,
A number of times during the heat of flame wars I've said some pretty nasty things about your use of prescription meds, alcohol, etc.  I thought about the things I said and they were cruel and unkind.  Since I said those things publicly I think it is only fair that I now ...

I've had a couple of conflicting "professional" opinions about this, so I
thought I would ask the question here and see what responses I got.
My question is where is the proper location to mount a CO detector and where
to mount a Propane detector.

I'm looking for a new monitoring service. I've looked at ucontrol and
nextalarm, but I'd like to find someone who can use the DSC native
Internet communicators (TL-150/250), and also offer cellular (or
packet radio) for backup. I don't have the cellular backup hardware,

Is somebody know how to set my DSC 2550 alarm to factory (default)
settings.Reset or something like that.I can't use my alarm because i
don't know any code or mastercode.I have new house with alarm which i
can't use 'cause a men who sold me the house did not tell me the code.(

Does anyone know where I can get a male connector and a female
connector so that I can make an extension cable connecting the female
connector coming out of the wall with the male connector attached to
my keypad panel?  Each connector has a single line of 12 contacts and

I have had my Ademco system in my house for 8 years and have had no
problem.  I was noticeing the other day that the key pad  is getting
more difficult to turn off and on the alarm.  I am looking to replace
it.  I looked at the back and see that there are 4 colored connection

Because of Hurricane Ike, most of my customers were without power for 2 to 3
weeks.  Of course the batteries went down and the clock settings were lost
which causes the panels to not know when to send a test signal.  I used
PC-Preset to access about 100 accounts overnight.  I set ...

Any recommendations where I can get a new Keypad for Westec security
system 760 (circa 1975).  I'm having a problem with the Emergency/
Panic alarm going off spontaneously and it's been suggested the pad is
the culprit (but it is no longer being made).  Any suggestions as to

Hey All,
I have a customer that was renovating a 3 story apartment building.  During
the renovation it was found that kids were climbing up the fire escape
ladder to the roof and having a party, not to mention the vandalism.  So a

Your Identity is Exposed!
Did you know your IP address is exposed every time you
visit a website?
http://squidoo.com/hide-my-id

A customer (and extended family member) and her neighbor are in a feud of
sorts.  Her neighbor had installed a high end multi camera set up worthy of
a large jewelry store and pointed them at her neighbors homes.The neighbors,
including my customer is freaking out.    I know the ...