General - Security Alarms

Thread preview

Thread	Last Post	Replies

Compass problem	31 Mar 2007 23:54 GMT	9
I'm told that when I get the error "panel disconnected after 30 seconds of inactivity", during the "Speed Change" phase that it's due to noisy lines or digital lines. I'm using a Cardinal MB24EX with "standard modem type" listed in XP.
Need wireless network camera, easy to use and small	31 Mar 2007 06:59 GMT	8
Need some advice from some folks who know way more than me. I need a camera to monitor a high crime area on our business property (A large K - 12 school) Crime happens after hhours.
Need help on reprogram a Faraday MPC 2000	30 Mar 2007 06:18 GMT	2
I have a MPC 2000 to reprogram and know nothing about it
motion sensors wired in parallel	30 Mar 2007 01:34 GMT	2
Hello group I'm new to wireless and would like to know if there is a way to program wireless motion sensors to achieve the same effect as two wired in parallel to prevent false alarms by pigeons? thank you.
Dual-tech 360 motion recommendations please	30 Mar 2007 01:03 GMT	9
I need a 360 that I can mount at 25' high and have coverage on the ground at 100' diameter (50' radius from unit). Preferably dual-tech because it's in a non-climate controlled metal bldg and two of the microwave zone will likely intersect.
Funny thought	29 Mar 2007 03:20 GMT	1
Was at a customer today and we were talking about our favorite old tv shows during luch break and started talking about Hawaii 50 and got to thinking what if Steve Mcgarret were around today and came face to face with dog the bounty hunter what would the dialog go like?
f.ck You...	28 Mar 2007 13:56 GMT	1
Bass.
Re: Programming a Napco GEM-P9600 V9 E-Prom Attn Robert Bass	28 Mar 2007 07:16 GMT	42
I appologize for posting directly to Robert B. I didn't realize it was an issue to direct a question to someone on a news-group. I did speak with Robert yesterday of which we had a lengthy conversation. I haven't had a chance to get into the panel to reprogram it as of yet, ...
XP400 Keyswitch?	28 Mar 2007 06:57 GMT	25
Does anyone knows how to connect a keyswitch and what do i have to programm on a napco xp400? Thanks in advance!
ISC West	27 Mar 2007 22:21 GMT	29
Anyone going? It's next week. Signature js - Light travels faster than sound. That is why some people appear bright
galvanic reaction	27 Mar 2007 20:42 GMT	16
Why do manufacturers give us resistors that are made of a different metal than the copper wire we are using? High voltage electricians know that you can't connect an aluminum and copper wire directly to each other. Roofers know you can't nail copper flashing with aluminum nails ...
Levitating ladders - must see to believe!	27 Mar 2007 16:46 GMT	8
Well I finally made a safety inspection of Frank's operation. I must say, I didn't approve of his safety policy. At least some of the fiberglass ladders were grounded...... http://fresh99.com/ladders.htm
Configuration of serial connection with quickloader	27 Mar 2007 06:56 GMT	7
I cannot figure this issue out...hopefully; someone can clarify this for me. I've got a PCI mini (serial) and attempting to configure my serial configuration so I can connect to my panel...BUT it won't work? I've got a gem p9600 and using quickloader 5.4.2. The chip on my system ...
Security Camera Kit Remotely Viewable over the Internet !	27 Mar 2007 05:44 GMT	5
Bill, hope you find this, I lost your email. The Security Camera system that I got YOU CAN VIEW All The Cameras over the Internet! You can use any computer. You just go to your system and you can view your cameras. All at one time or one at a time. You can even back up and
pull down the heat detector wheres the wire	26 Mar 2007 16:50 GMT	9
was pulling out an older burg fire system today and when i went to remove some heat detectors which were attached to it found several which had no wiring to them.. looks like the fire alarm experts strike again in Pa.