| Thread | Last Post | Replies |
|
| protection | 23 Jan 2007 06:11 GMT | 18 |
What type of lighting protection would you use on a 600 ft 25 pr under ground cable from school to a stadium?
|
| power832 | 22 Jan 2007 04:22 GMT | 15 |
What do I need to add keyfobs to a DSC Power 832 PC 5010. Currently has no wireless capability. TIA
|
| C&K 2316 Panel; Watchdog Reset | 22 Jan 2007 01:05 GMT | 1 |
The 2316 panel has a "Watchdog" circuit The circuit board also has an LED labeled Watchdog. My question is: What does the Watchdog watch? What is it about the panel that requires it to reset itself -- and send us a "watchdog
|
| Need Mac-compatible multi-cam IP security system | 22 Jan 2007 00:39 GMT | 1 |
Subject pretty much describes it. I would like a camera system (1 cam to start with, eventually upgrading to 4) that will allow me the following features: view over IP address
|
| CCTV | 21 Jan 2007 22:22 GMT | 4 |
I have a barn which I let in the summer for holiday lets, I want to mount a security camera on it to monitor who drives down our drive (200 yard driveway). What I don't want is to give the barn the appearnace of Colditz, so I was thinking of mounting a home made bird box type
|
| WTB: SIS DOS Keytag | 21 Jan 2007 17:30 GMT | 3 |
Does anyone have a SIS DOS version keytag for sale? I have a friend that needs to use the DOS software to monitoring openings & closings. Please contact me directly. Thank you
|
| Link | 20 Jan 2007 19:33 GMT | 1 |
Looking for a microwave or similar. Would like 4 - 6 channels to run a mile or less both ends and working. I would like to run a computer link to the mountain top. And on and off controls, radio controls.
|
| Configuring CO loop on NX8E | 20 Jan 2007 15:34 GMT | 10 |
I've spoken with tech support people several times in the past 7 years in an attempt to get their software engineers to provide one or more circuit configurations in the NX8, and more recently the NX8E, similar to the fire alarm loop configuration -- for use with devices that
|
| Testing Duct Smoke | 20 Jan 2007 14:06 GMT | 10 |
Can somebody please tell me how to test a Duct Smoke Detector? I know how to test the rest of the system but not the Duct Smoke. Thanks
|
| CP-01 coming to a theater near you. | 19 Jan 2007 22:58 GMT | 5 |
Phx ordinance 10.76.01(D) "...The component must be labeled by Underwriters Laboratories, Inc. and shall specifically include the control panels labeled CP-01 and passive infrared sensors
|
| Home Depot Motion Sensor, On when power is turned on. | 19 Jan 2007 07:52 GMT | 30 |
Trying to build a low tech alarm. Bought a Home Depot Motion Sensor 180 degree Heath / Zenith for floodlight. Open the case, modify the connection of the internal 24 V DC relay.
|
| Outdoor IR Cameras in Housings? | 19 Jan 2007 05:46 GMT | 4 |
I would like to put Outdoor IR cameras inside metal housing but was told the IR Leds will reflect off the glass in the housing. The cameras are designed to mount stand alone. Is there anyway to set these up without removing the glass in the housings? They are being used in a very ...
|
| Which Escort modules for a DSC 1550 Panels | 19 Jan 2007 05:31 GMT | 6 |
I have an old DSC 1550 panel I'd like to add the escort voice module to. Does anyone know what model escort went with these? Thanks in advance Dave
|
| Mind Control: It's Real I Tell You! | 19 Jan 2007 00:20 GMT | 3 |
I know a woman who' been stalked by the CIA for years. She's been in and out of institutions and lost every job she's ever held. I can't say where she is now, but she has a legal firm on her side and will soon being a lawsuit against the appropriate people.
|
| here we go again- FIOS | 18 Jan 2007 21:18 GMT | 26 |
Any one out there seen this new phone service and how it might work with alarms? It's a Verizon fiber optic phone and internet service.
|