Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsGeneralRural LivingHome AutomationSecurity AlarmsConstructionRepairPlumbingCleaningPest ControlLawn and Garden

Homeowner Forum / Security Alarms / November 2006



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
ademco 20SE and 4286 phone module ring number?22 Nov 2006 02:01 GMT10
I just added the phone moduel but I have voice mail supplied by the phone
company rather than an answering machine.  This does not appear to be
addressed in the installation manual.  If I set field 95 to 15 and call from
outside, let it ring once, then call again, I get a fax ...
Napco Gemini's fuses21 Nov 2006 07:00 GMT1
Hello, I am looking information on where i can order these special
fuses. Hope the professionals in this group would help.
Thank you in advance.
Timothy
Inter-Tel Axxess Phonee System21 Nov 2006 01:14 GMT1
Anyone know how to program this system? Thanks
Ion vs Photo smoke detectors20 Nov 2006 05:08 GMT11
I looked at a Notifier system installed recently by a major local fire alarm
company today and found that they have installed Ion detectors in all of the
classrooms of a school.  I would have spec'd these as photo detectors.  We
had our first cold night last night and they had 3 ...
Fire Alarm System Inspections. How and how much?20 Nov 2006 04:03 GMT30
What do you check for when doing a routine yearly inspection.   How do
you price it out?   I have never done this and I now see the error of
my ways.    I need to get a program started and would like some
guidence.  Thanks PAul.
Contronic House Alarm19 Nov 2006 20:47 GMT5
I have a Contronic house alarm.  It was here when I moved in.  ----- 1.
--How do I open the control box without the alarm going off? When I
came home today the house alarm siren was sounding.  I had set the
alarm when I left the house.  Just before I came home a wind storm had
DSC 161619 Nov 2006 11:35 GMT13
Anybody know anything about this panel?
Apparently it's a new 6 zone panel from DSC
Nothing on their site strangely enough
Older Ademco Alarm Parts19 Nov 2006 03:35 GMT5
I'm looking for older Ademco Alarm Parts. Control panels, key switches,
bells, bell boxes.
Not interested in motions, beam detectors of the older era but panels and
some accessories I am.
Automatic Renewal Prohibited18 Nov 2006 00:34 GMT8
On Ken Kirschenbaum's website there is a page with state by state information on this subject.  I thought some here might be
interested.  Here's the link:
https://www.kirschenbaumesq.com/autorenewal.htm
In brief: Arkansas, Connecticut, Illinois, New York and Utah have case ...
Kidde Combined Smoke / CO Alarm17 Nov 2006 16:45 GMT5
Hey guys. I've been having some trouble with a Kidde smoke/Co alarm
I've recently bought for my room. I am in the unenviable position of
living with a hot water boiler in my wardrobe so I thought that whilst
i was going to buya  smoke alarm anyway, I may as well get one that
A real world opportunity!17 Nov 2006 16:03 GMT3
Where Would $3,000 Every Week Take You?
A real world opportunity to make big Money and create Financial Freedom
running your own business from home!  If you did not earn $3,000 last
week, visit my website at http://www.OnTopBiz.biz
Gemini P816 - keypad question16 Nov 2006 15:03 GMT5
Can you use 2 different (but compatible) keypad models on the same bus on a
Gemini P816 panel?
TIA
clifford car alarm install help16 Nov 2006 09:30 GMT1
installing in a Mercedes sprinter
does anyone know where this wire goes to for the indicators to flash.
White/red light flash input - this wire is the input for the on-board dual
light flash relay. if the vehicle has positive parking light activation
Finding my security system16 Nov 2006 00:31 GMT1
We bought a new house a few months ago.  It was only  yesterday that I
noticed our sliding door in the back has a sensor on it with an ADT
logo.  It has a wire from it that goes up in the wall, but that's the
only trace i've been able to find.  I know it can't be TOO old, because
Discreet camera15 Nov 2006 17:14 GMT1
I have a customer with a Door King keypad on a gooseneck pedestal, operating
a rolling gate. I will be replacing the keypad with a prox card reader.
Customer wants me to place a discreet camera in or on the pedestal to see
the face of the person using the card. I know what I'll ...
Pages: 1 2 3 4 5 6 7 October, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.