Homeowner Forum / Security Alarms / August 2006

I'm looking for a wireless device that will automatically turn OFF a table
lamp (or other item) plugged into a standard 120V wall outlet when a remote
sensor is activated.  For example, a person walks into a room and is
detected by a wireless door switch, a motion detector, or ...

So all of you don't think I'm lying, here is what I did.
I built one of the PC Link cables, downloaded the DLS software and logged
into the alarm system.  Here is the printout of the entire system.
What am I missing?

ADT Essential Wireless Package is it any good?  Consists of one keypad, 1
control panel, three doors alarmed, 1 smoke alarm, 1 quick key, 1 motion all
installed. monitoring $30.99 a month.
upgraded talking control panel is $85.00,  Premiere package is the same, I

We have a home alarm system, installed about 15 years ago, with an Acron
control.  About two weeks ago someone was working on the roof, and evidently
the vibration caused the door magnetic sensor to fall out.  We did not
notice it, but now the door zone is always lit.

Take a look at this page from the BagelsAndLox website and read about
the "special cardboard" now being offered.
http://www.xxsecurity.com/buy.htm

Ok, about to yank my hair out.  632 system and I can't get wireless door
contacts to work (or test).
Docs tell me I can only use zones 9-32 for wireless.  Ok, I did the * 8
[installer code] 002 and changed the defintions of zones 9-16 to [01] dealy

We currently use AlarmNet for our cell backup systems and are concerned
about the impact the Sunset Clause may cause in 2008.  My understanding is
that Honeywell is currently looking into alternative systems.  Do any of you
use a digital backup system that will continue to be ...

Have had a DSC 632 alarm system for a while but today there are no lights on
the keypad and I can't arm.  Just beeps real loud and then won't let me do
anything.  Shouldn't at least one light be on?
Thanks

anybody know what group number to  program motion detector to be active in
level 3 (away) only ?
I only have the program sheet for commander 2000
Thanks

I'm a new DUY'er and I just finished installing a small home security
setup for my Home office.  It's a DSC Power 832 with just one door and
one motion sensor.  Installation went fine and with a little
programming help from my retailer the system works great (Thanks Home

I have a DSC Power 632.  It is set to automatically send Contact ID.  I
set up the smoke for zone type 88. When testing, it triggers a fire
zone locally, but the CS is getting a burg signal.   Am I missing
something?

I'm looking for the power supply for an old FIre-Lite Sensiscan 1000, the
part # is PSM104 if anyone has one or knows where I may be able to find one.
Thanks
Doug

bAsshome, the online company with the motto of "There isn't a law we
won't skirt", has now decided to offer duty/tax free cigarettes on
bAsshome. When reached for comment company bAsshome owner Robert bAss
stated what they were doing was totally legal, and plans on proving in

Got a service ticket from one of the nationals i sub for to go to a
retailer to find out why central could not conect to panel and download
event log .
Get on scene and find a DSC 1515  with 6 zones 5 being used 1 open and not

I have an ademco vista 20 with a 6150 keypad.  Have had it for about 3
years.  In the middle of the night last night, the alarm sounded for
about 15 seconds, then turned off on its own.  There was no record of
anything happening on the keypad...in fact it still had the red light