Homeowner Forum / Security Alarms / August 2006

NSA PSYCHOPATH Steve Foley went to corenews CRYING Corenews MOMMY,
Corenews MOMMY, Corenews MOMMY PLEASE HELP ME. This McGinn is
BEATING the sh.t out of ALL FBI, CIA and NSA PSYCHOPATHS and
we cant to do a thing about it.

I have a DS3200 that went south last night. Has anyone seen the
following- It appears the EPROM has failed. I replaced the existing one
with a home automation one that I had from another project and the
alarm was able to poll the zone expanders once again. I tried this

Hi. I just got a new Elk M1 system which I want to install in my home.
In addition to a simple sensor i got at RadioShack I got a wireless
module and 2 wireless sensors. The test run was good. The basic
functionallity of the Elk seems to be working fine. I am ready to do

So all of you don't think I'm lying, here is what I did.
I built one of the PC Link cables, downloaded the DLS software and logged
into the alarm system.  Here is the printout of the entire system.
What am I missing?

Would like your thoughts on how to spec a request for bid for single home
construction sites.
Many of our construction sites are being burglarized by the meth addicts. We
were thinking of using a portable DVR and battery in a hidden box and B/W

I recently moved into a new first floor apartment. While the
neighborhood seems safe enough, I grew up in the Bronx, so the need for
home protection is always in the back of my mind. So, I looked online
and found a home monitoring system called Homesight on

RUTHLESSLY KILL NSA and FBI PSYCHOPATHS and GO TO HEAVEN.
NSA and FBI PSYCHOPATHIC PUSSIES broke into my apartment yesterday and today
and turned the rice cooker on yesterday and stole a circuit city hard drive
rebate form today when I went out.

If anyone in this group can help me I would apprecaite it.  I have vinyl
windows and a vinyl slider in my home.  I am about to put up the window and
door contacts for a security system but need some advice.
Now, on vinyl windows I am assuming that I can't screw in the contacts.

We have a DMP XR200L based wired alarm system consisting currently of
smokes, door/window sensors, and motion sensors.
I would like to add a water sensor in the basement and at least one
temperature sensor.

Dows anyone have any info about these old relics? I was given a couple
of them, and would like to use them for monitoring, but there doesn't
seem to be any signal coming out.
Could I need any kind of adapter on the signal to convert it to a TV

My daytime pics are OK but the nighttime pics are terribly grainy like
a NASA moon landing.
My current setup includes a standalone DVR set to maximum possible
recording quality which is 720 X 480 at 30 IPS, divided by four

   For wireless Zigbee or Z-Wave technologies, which one is more
popular? In terms of their applications, are there any  wireless
smoke/fire alarm products based on one of such technologies in the
market? If yes, what are brands and vendors?  Any pointers are

Over a year ago I purchsed a new Kidde Nighthawk Premium plug-in CO
detector (Model 900-0076 AC) for my house. Initially it seems to work
fine, but after several weeks it started giving single beep every hour
or so.

Let me ask this.  I am correct right, that the two slots for PGM 1 &2 are
not hooked up to anything and they don't need a resistor right?

I have mostly double-hung windows.  They are currently able to remain
open a few inches and still have the system armed.  Now we are adding a
couple of casement windows.  Is there any way to wire them and allow
them to remain open a few inches on a nice day?  Thanks!