Homeowner Forum / Security Alarms / May 2006

Can a cable be used to connect to a DSC 864 panel that is longer than the one that is supplied with the PCLink?
I would like to connect to it with a pc that is in another area that would require a cable 50' long.
Thanks,
Mike Bougard

Does anyone have an old copy of DSC DLS1 v6.2 they can email me?
Thanks
Jim Rojas

I'm looking for information on equipment that can/should be used to
install IP video cameras on poles around a perimeter (1-2 km, or more).
Token-ring routers typically require all drops to be plugged into a
panel (operates in token ring fashion, but physically is a star), which

Hey...those of youse guys concerned about the cost of replacing your analog
Uplinks...give Uplink a call. They've got an exchange deal going for the
next 90 days...send in your old analogs for 88 bucks each off a new digital
one. Comes out alot less than distrib pricing.

Found out today that city of pittsburgh with all its budget cuts eliminated
its fire prevention inspectors most who were ready to retire and turned fire
inspection over to building inspection bureau who has no one at present
certified under ICC to due inspections for fire alarms ...

Recently i install a Caddx NX8E-GR. Everything was ok except the basic!
The user #1 (master) does not have access to change his own code or to
programm even other users. That means that in a brand new control
panel, the user (#1 i believe) with code number 1234 by default isn't

Lookiing for Radionics D-1254 Keypads in fair condition
Also Anyone have any of the removable terminal strips that were used
on the D-7112 Control Boards.  If you have any of the control boards
you will dump real cheap I will take them as well.

I've got a DoorKing 1871-010 module with a burned resistor at location
R18 on the board.  The resistor is burned bad enough that I can't tell
what it's value is.  If anyone has one of these units and can look at
R18, that would be great.

Forum o zabezpieczeniach
WWW.arm.pl/forum