Homeowner Forum / Security Alarms / February 2006

Does anyone have a copy of the DSC-ADT software they would like
to share or sell?

Group...
I am trying to identify an alarm company which does busienss in the
Chicagoland area.
They claim to have a license, possibly a city electrical license, that

Authorized dealer. Just email me your needs.
We are located in ottawa.
1554@bellnet.ca

Hope someone can help with this.
I would like to be able to set up a alarm on a car. It would only go
off if the car got in certain distance of some point, say 100 feet.
In other words if the car drove up to where I work my alarm would

I really need a low level home survailance system.
I was thinking of 2 of the motion detecting flood light color cam
setups from x10.
Plus a low light level B&W Xcam

Recordable voice sirens are one of my favorites.  The Elk 120 is a little
pricey, but you can do some neat stuff with it with its 4 voice channels and
4 inputs.  I have one at a school that blasts a message throughout the
building whenever anybody arms the alarm as a warning.  It ...

We are getting ready to sell our home...
I installed a Vista-40 many many years ago...
As I don't do this for a living, I have forgotten all the stuff you guys (&
Gals) take for granted and do every day.

I have a wireless motion sensor and I have tried setting on my alarm
and then starting in the back of the room to see how far I can get.  I
notice that if I do this test immediately after the alarm system delay
is finished the motion sensor doesn't go off, even if I jump in front

Could somebody please email me the installers instruction for Allegro?

Today I had a strange occurrence with a EOL. The system was not reporting
the zone open even though I was holding the door open and looking at the
keypad. After a period of troubleshooting found that the 3.74k resistor was
now 5.86k. Replaced with new and all is well. This is the ...

What low-end/high-end DVRs have you found to be reliable with
customer-friendly applications? What manufacturers have you been
disappointed with?
Who has the best technical support?

Hi, I'm looking for a Napco DD1484 in working condition to use as a
slave dialer in an existing system. I know I can probably use a DSC
panel to do this but I'd really prefer a 1484 as I have the Pro 410 and
can burn the chip. If anyone has one they'd like to part with please

Gotta do a safe-room door lock...I'm thinking a 600lb mag lock? The door
will be semi hidden and swing towards the opening person/side. No other
hardware will be visible on the door...it's in a MBR closet and will have
shelves on it. Heavy wooden door.

Where does one buy the plastic/glass rods that hold the door of a fire
alarm in place?
Chris

I am about to run out of yard signs.  The place I got them last time is
gone.  Where is a good inexpensive place to get yard signs?  What prices
have you paid recently?
TIA