Homeowner Forum / Security Alarms / September 2005

Its an interesting switch, but its actually pretty big when you consider
that its most often used on custom applications.  I like them in the top
dead space of sliding doors and sliding windows.  Unfortunately there is
quite often limited space due to frames being squeezed into ...

My own business, making hundreds of thousands of dollars, with little
investment,
could it be that simple??? Just read this. I don't even have to
convince you

I have a Philips video monitor with a Pelco
duplex monochrome multiplexer.  The problem is
with my sony camera (b/w video #ssc-m183) no
matter were I plug the camera in on the 9 camera

I know a small home automation dealer who wants to turn his customers over
to me for monitoring.  I am wondering what a fair price is to pay him for
these customers.  He usualy has me go and program the controls for him and
set up the monitoring.  What is everyone else paying for ...

Have any of you started adding a temporary sur-charge
to off-set the rising gas prices?  If so, did you charge a flat trip charge
before, port-to-port, etc? How much are you charging?  How did your
customers respond?

We are running Keri Doors 4.3 and are having trouble with the
Attendance Detail reporting.  Our configuration utilizes a controller
for two access readers on two different doors.  One of the readers are
coded Reader Type - In, and the other is coded as Reader Type -

i dont do much camera systems and the ones i do are very simple, i have a
customer that wants a 4 camera system and wants to be able to connect them
to a computer were it would then be able to be monitored from a remote
location. im just working on a site proposal for the sutomer ...

We have the following NEW items for sale.
14 AT&T 8340 Keypads
12 AT&T 8600 RF Receivers
5 AT&T 8441 Keypads

DuMP DuMP DuMP Da-DuMP
Another one bites the dust!

I don't see an option on my Napco 1016e panel to implement Contact ID
as a data format.  Is there another name used by Napco for CID?
Thanks in advance,
Rob Houston

I'm trying to sort out the installation of 2 4-wire smoke detectors to
my Ademco Vista 15P panel.  According to the instructions, I need to
connect power in a way that will allow the smokes to be reset.  It
looks like the panel has a "trigger" point, where if I connect the +