Homeowner Forum / Security Alarms / September 2005

Does anyone want to share Honeywell product handlers? I have some, but I
think I am missing a few, or I may need updated versions. Here is a list of
what I currently have:
Honeywell (Radionics) Product Handlers

Does anyone know where to get a simple control unit for a proximity
reader?
I'm need to build a single door accesscontrol.
I have a simple proximity reader (for tags) that outputs in Wiegand

I've successfully programmed the subject unit to handle 13 wireless window
contacts and 3 wireless keys.  I enrolled a zone for each of the contacts on
my Power 832.  Is there a way to enroll multiple contacts to a single
physical zone? As you know, I'm limited to 32 on the Power ...

Have Anyone got a  programming manual for EDM 908
This panel is about 15 years old .
Even Bosch doesn't provide tech support now.

I preferred to own my alarm equipment rather than "rent" from one of
the big companies, and I had access to a good installer.  So I bought
equipment from "Home Technology Store" which promised e-mail tech
support for purchases.  I don't need much support, but I did have one

Does Anyone Out There Have an updated document of the RS-232
communication protocol for the Caddx NX-8e.  I have the communication
protocol for the NX-8 implemented on my HomeSeer setup but wanted to
update my code with the NX-8e.

I recently installed a Vista 20P and everything was working fine until
one of my two 6270 keypads went on the blink.  I have another 6270 that
is working fine and I have a 6160V that is also working fine.  So my
panel and connections are all in good working order.

Greetings I know a commercial alarm system installer who moonlights on
residential set-ups.  Basically I do the unpleasant part (running the
wiring) and he does the programming and is paid appropriately for that
task.  What he does not do is sell alarm monitoring to avoid a conflict

Was he kidnapped?

I have a Paragon Plus, recently during a thunder storm a large spike
occured on the incoming mains supply.
As one result the alarm box froze and would not respond.  In an atempt
to fix this I disconnected the mains supply to the unit.

I am tired of changing batteries. Since the alarms have A/C, couldn't
the A/C be continually charging a backup battery? Where do I find
Smoke/CO2 Detectors with Rechargable Battery Backups?

does anyone know of a web site that show you how to set up a CCTV
network of cameras, how to strip the rg59 cable and crimp it, how to
set up PTZ cameras, and how to intergrate then into a DVR. i know its
going to be different for each dvr, but any help would be nice.

I work for a small electrical contracting business that does amnily low
voltage work (Burg & Fire).  When installing fire we work with
Fire-Lite mainly.  On a take over account, I can across this Notifier
AFB-200, which looks like their version of Fire-Lite's 9600 panel.

Well, I don't really have any INTELLIGENT questions but I have some dumb
ones.  First, here is my situation:
I have old 15k' light mfg building in the Cleveland inner city.  I have been
broken into 15 times this year alone.  We have an ADT system with 3 PIRs, 1

Oye I shoulda known not to get involved with this guy's installs..
Anyway.
Vista 20P with 10 (yes 10) interior doors contacted all on one zone (yeah I
know)..the homeowner wants them to chime. I'm not sure if you can chime an