Homeowner Forum / Security Alarms / September 2005

Hi all. I'm in need of the following parts to make some old stuff I have
into a system. If anyone has one or more of them, or knows where I can get
them, please let me know where & cost. Thanks.
Vista 50p-

Anyone know of any IP based access control and or alarm systems, Ideally
power over Ethernet powered.
thanks
S

This is just too funny not to share.  This is an excerpted from an article,
which appeared in the Dublin Times about a bank robbery on March 2.
Once inside the bank shortly after midnight, their efforts at disabling the
security system got underway immediately.  The robbers, who ...

All,
I currently have a house alarm being monitored by P1. I plan to sell the
house and would like the Master Code (I am alarm system illiterate so I hope
that is correct) to give to the new owner in case they are DIY type and want

Congradulations I see you made it into September SSI
telling NFPA which end of the bridge to jump off.

This list has been set-up to jeopardize my post in the expectation
that I would stop showing the disadvantaged of Wireless alarm systems.

What types of buildings are acceptable for a UL Central Station?  I have a
copy of the UL spec, but it says things like "the roof is required to be a
class A"  with no other explaination.  What is a class A roof?  I know a
block building with a gravel roof is acceptable but I am ...

Another radionics and DMP into the dumpster.
Customers glad to see them gone and replaced with Honeywell  Vista and FBII
Omni control.

hello to all
i'am from croatia and i am installers in small security company. I' m
looking or programming software for different type alarms and i found it in
http://homesecuritystore.com, but all sw, and manuals are password

I have a ADT Focus 32 system installed. Does anyone know how to:
1. Change the dial-out phone number from ADT's monitoring center to
some other number. This is the number that the system dials out in an
event of a break-in.

Monitoring by professionals is not required.
The usual arguments of monitoring stations are that they are
available all the time, they apply standard procedures with your
authorization and some phone numbers you have to provide of persons

Anyone know of a panel that will run on 12 or 24vdc and not show an "ac
power trouble"?  I also need it to be able to auto arm twice each night.
James

Hello again group,
I was wondering if all zones fire, smoke, heat, motion and doors should be
programmed as supervised and should they all be 24hr?
I know fire is 24 hour supervised, but do the motion detectors and door

Any of you chaps that don't sub-contract care to share how you quote your
average res jobs? This is driving me batty. I find I spend more time dicking
around with mark-ups and estimating time (and these friggin things ALWAYS
have surprises (whathefuck is a check 100 ?!?)) than I do ...

Does anyone know if there is software that can convert the data the alarm
panel sends out that would allow you to use a standard modem?
I'm looking to run some sort of a emulator in the background that would
mimic the Silent Knight 5530 modem.