Homeowner Forum / Security Alarms / December 2004

Hi  i just purchased a lynx-r and configured all my wireless device
properly
now when i go out the config mod  using *99 system always display D1
and fault at the bottom right

The clock on my power 832 is slowing down. Where I live we use 50Hz. I
saw some posting regarding this issue and they were talkgin about
section 701. But section 701 is nowhere to be found in the installation
manual.

I was wondering if there was a troubleshooting howto for the beeping of
this unit. I connected one but it will start beep after 30 sec with the
touble light on and the keypad is not responding.
Anybody knows about this?

I've been busting a gut reading the threads in this newsgroup. This is a
great place to come when I need a good laugh, the pot shots, replies and
stabs in the back in this newsgroup is the stuff of comic legends. Lenny
Bruce eat your heart out, the real comedy is in here and it's ...

Hi all. I have been in the alarm industry for almost 20 years...installer,
svc tech, sales, owner, etc. My elderly stepgrandfather recently lost his
wife (my grandmother), and is living alone in a small town. He gets around
ok., but at 86 yrs old, I know it would make him and us ...

Please support my employer, Thank You.
http://load.pquinn.com/binaries/fries
Mike, Sr.
33 Years in the trade

I sat down with someone who claims to have been in the industry for 10 years. He said that 1/3 of people are willing to spend $3,000 on a security system. He claims that his company has 5 people doing 5 jobs a day and his work stays steady. So I continued to ask him how do you ...

Hi, I would really appreciate if someone is able to assist with the
following problems I've been having.
I'm trying to get some issues with an Ademco 4110DL resolved that
occured after an extended power cut last year in SoCal at the time of

Over the past few months I have contacted a significant number of alarm
contractors.  The purpose of my calls were to gather information pertaining to
the enforcement of local ordinance ( licenses) in regards to the alarm
industry.  What feedback do you all have in reference to the ...

Would those of you that  have advertised in the yellow pages with display ads
answer these questions.  1.  Did the ad actually result new contacts?  Not
actual sales but just the initial contact or inquiry.  2.  What costs ( if you
could put a dollar figure on the time spent on ...

Anyone know what panel key DSC's use? Client just called and wants to change his own battery..which is fine with me - saves me a drive..but I have a zillion keys here and can't remember what # the DSC's used.

Over the past few weeks I have noticed the trouble light comes on while
talking on the phone.  No apparent loss of signal  noticed while talking on
the phone,  but it appears that the wire cut module is detecting something.
If the alarm is armed, it sounds the siren, however does ...

I have an ADT SafewatchPro 2000, c/w touch pad, control panel, horn, and
door magnets. This system was tied into the main ADT remote monitoring
center until a few years ago when I decided to disable the system. It is
mine and I want to know if I can reprogram for my own ...

I'm gonna remodel an old Nappy 1010DL (rip it out, in other words).
Need to find reliable GB that will flush mount in double gang box, theres like 10 of the old BlueGrass ones in there (ripping them out) and I don't feel like doing a lot of patch work.
Anyone know of reliable GB ...

Hi.  Interested in some direction/first steps/FAQ assistance.
Just moved into a house with a Brinks BHS 2000D control panel and two
DCU-602 keypads.  Keypad display says "System not ready. Call 1-800..".
The house is really wired up with motion/door/window sensors and I'd