Homeowner Forum / Security Alarms / November 2004

Hi, we have started using EOLs on the device side in this country now,
or we will be. Its been the norm just to put them on the panel side,
but our theives are now becoming a 'little' smarter.
When using say a T-100 contact, roll-up door contact, or a motion

GET YOUR TRIP
TRIPS TO DESNEY
TRIPS TO HAWAII
http://travelexpert2004.us

Can anyone direct me to some cellular telephone interfacing devices.  I have
a customer that would like to use a cell phone as a comm. device for an
alarm system because a land line is to far away.
Thank you,

Story on Protection One...
http://securitysales.com/t_ci_newsView.cfm?nid=1962

How do I hook up a Panasonic WV-CP454 to a standard TV or VCR?
I tried directly - BNC on one end of coax - F-connector on the other,
hook right to TV -- nothing.
I hooked it to a VCR (not time lapse) input, nothing..

I'm trying to find a system that can monitor a vacation home we have in
Washington State that does not have phone service or 120 volt power.  Cabin
is a mile away from any wires.   Cabin has an off-grid solar powered
electrical system and a very large 24 volt battery bank and 120 ...

You guys that install radionics products. FA good used panel and keypad from
an old install, working when removed.  No Reserve
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3855741174
Pedroman

Any Alarm Controls with TCP options for an SDK, and also, any
integration into other devices for controlling appliances, etc.
Im looking to do a member web site, seperate of standard monitoring,
for clients to sign up to be able to access from anywhere. If the

I have three DMP 704's (four zone loop expanders), One 1712 control panel
(circuit board only), one 984 communication module and one LCD keypad. Either
the panel or the keypad is shot( or maybe both) anyway in the unlikely event
anyone wants these before they go in the dumpster, let ...

Digging around the weeb, I'm seeing references to magnetic sensors that use
a mechanical arrangement such as this:
http://home.howstuffworks.com/burglar-alarm1.htm .  I seem to recall that
some of you on ASA mentioned that reed switches rule.

Mark, I think I discovered the reason why I was having so much trouble
connecting with the software. I have three different modems on a three way
switch. I noticed the last time I powered up, my computer "saw" the
USRobotics modem for the first time, and proceeded to "install" ...

Perhaps a few of you will remember this true tale. I recall seeing it on
the news many years ago. I believe that it happened about 6 or 7 years ago.
A chicken farmer in the midwest somewhere beheaded a chicken, but
managed somehow to severe the creatures head at a location where ...

My house has 3 hard wired smoke detectors, BRK 1839WM.  The house is about
10 years old.  I was going to replace them, however, the house also has 2
wire Edwards Signaling heat detectors, model 283B, in the garage.   As far
as I can determine the heat detectors do not an audio alarm ...

I live in the San Fracisco Bay Area and recently requested quotes from
both ADT and Bay Alarm.
ADT quote is installation : $570/- plus $32 monthly monitoring fee w/
2yr contract