General - Security Alarms

Thread preview

Thread	Last Post	Replies

Modem II or IIe	31 Oct 2004 19:22 GMT	8
Does anyone know the handshake frequency used by the Modem II and IIe formats? I would also like to determine the format of the alarm message used by these protocols. Thanks.
Firex Smoke/CO Alarm Problems	31 Oct 2004 17:15 GMT	9
In compliance with code, our electrical sub-contractor installed smoke detectors throughout this new house. He also installed in a central hall as part of the system a "Firex Smoke/CO Alarm Smoke Carbon Monoxide Alarm Model FADCQ." This device is causing a lot of
RJ-31X DSL Filter	31 Oct 2004 00:56 GMT	3
It seems I recently saw an RJ-31X DSL filter combo that provides for line seizure etc... I don't know why, but I didn't mark or save the item when I saw it. I must have been looking for something else. Any help here?
ADT Safewatch 3000-Vista 20	30 Oct 2004 18:31 GMT	4
Can anyone tell me how to turn on a second keypad on this panel? The first keypad address is 16 but can't get an address for the second keypad. Naturally the Vista 20 programming doesn't help. Thanks in advance
First Alert FA162C	30 Oct 2004 13:22 GMT	1
Looking for the installers manual / worksheets for the FA162C Alarm Panel... Also...is there a master reset for this unit? Thanks in advance. Dave.
Pennsylvania: Recording Audio -- You're all wrong	29 Oct 2004 05:37 GMT	27
Here is the deal: I just came from a wedding. Coming across the Walt Whitman Bridge from New Jersey to Philadelphia, PA there is a toll booth. There is a sign as soon as you pull into the cashier booth, it reads: "Audio and
Programing napco 3200 panel	28 Oct 2004 23:28 GMT	5
I want to program my gemini 3200 panel so that the motion detectors are off when I set INSTANT in the evenings. I am trying to skip the step of pressing interior bypass and then setting my alarm when going to bed. It sounds simple but then I am a novice. I have the software
Direct Response Security Systems	28 Oct 2004 16:47 GMT	3
I have been contacted by DRSS. Has anyone had any dealings with this company, good or bad? I live in the UK and DRSS is a UK firm. Thanks in advance.
Another case for why telecom guys should not installl fire systems	28 Oct 2004 11:46 GMT	19
was called to wire in to central station 4 buildings at a college garden style housing in washington county pa. systems were vista100 panels dedicated for fire but installers used cat 5 for horns. no bushings no supervision no smoke near panel , improper wiring technigues
Shock Padlock - A New Anti-Theft Device	28 Oct 2004 09:51 GMT	1
Good Day, I wanted to introduce our product to you, the SHOCK PADLOCK. The Shock Padlock is the first of its kind. It is a padlock that can be used to lock gates, safe shops, workshops, and other areas that need secure padlocks. It
GE/ITI water sensor	28 Oct 2004 08:47 GMT	2
Is the SAW water sensor that GE sells as part of its Home Security line the same as the GE/ITI 60-744-95R (NX695)?
FS: C-Cure APC-8X access control panel	28 Oct 2004 01:16 GMT	1
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3848788380&ssPageName=ST RK:MESE:IT
Looking for Irevo NateCare dealer	27 Oct 2004 23:09 GMT	3
I like there natecare door lock system. Anything close to this in the US ? Can't seem to find an installer or dealer of this alarm system. http://www.irevo.com/
hinge side installations	27 Oct 2004 14:52 GMT	11
My house (before we gutted it) had an alarm system with recessed magnetic door contacts on the hinge side. An installer friend recommends against hinge side contacts. My wife liked the nonvisibility of the hinge side contacts (done by a previous owner).
Elk M1	27 Oct 2004 03:45 GMT	22
Hey Frank! How are you making out with the M1? You weren't posting for a while so I was figuring you were hooking it up. Are you doing anything interesting with it?