Homeowner Forum / Security Alarms / July 2004

I have a DSC 864 system and am not having any luck getting a T-Link to
communicate.  The 864 sees the T-link and I have programmed the IP
info into the system via the keypad.  The T-Link knows my PC ip
address, however, I can not get the DLS2002 software to talk to the

Anyone know where I can get my hands on a DL Smart programmer. Das dont
supply them anymore, so if anyone wants to sell one, let me know.
Paul

Weet er iemand waar je een wireless systeem van powermax kan kopen in
Belgie ( als particulier ).
.. Of een gelijkwaardig systeem in de zelfde prijsklasse.
Alvast bedankt.

We have security installed, and we had our patio door replaced, guys who
replaced it, took off sensor, and part of the contact in the frame, but
forgot about part of the contact on the door.
We have Ademco 5815 sensor with flair VIP94 contact

I'll be moving into a new house within a month and having a security system
installed. I'd like to be armed with a litle information before interviewing
installers.
1) Cats and motion sensors: I'm assuming that motion sensors are the heart

I just wanted to inform anyone looking for a reputable monitoring company,
that NextAlarm is the ticket. I just switched over to their service after
using a company for the last two years that all of sudden stopped sending me
a monthly bill. I started to look around for an ...

A commercial bank is acquiring two existing banks.  They want to
install security on the main vault & night deposit chest only.  Both
banks are in very, very, small communities, without local police,
having only the county sheriff department available to them.  Without

Who else has been having problems with wire boxes full of knots.?
We average 7 out of 8 box with knots in the wire..
Seems most of the manufacturers using boxes have the same problem..
RTS

The announcement is that Wireless Alarm Systems are
    unreliable during "Radio Frequency Interferences" known as RFI.
RFI take place when the wireless alarm system receiver receives two or
more transmitted signals simultaneously.

The announcement is that Wireless Alarm Systems are
    unreliable during "Radio Frequency Interferences" known as RFI.
RFI take place when the wireless alarm system receiver receives two or
more transmitted signals simultaneously.

Can someone advise on how to direct connect Compass with a Vista 20P ?

Does anyone have a rough formula for estimating the labour required to do
wire runs in industrial factories locations from a skyjack?

A commercial bank is acquiring two existing banks.  They want to
install security on the main vault & night deposit chest only.  Both
banks are in very, very, small communities, without local police,
having only the county sheriff department available to them.  Without

It's a vector or vista. The sticker on the eprom says 3115 ver & oct
92
It's had some problems & now has been defaulted *97 in error.
I can use the default installer code to get in to programming mode via

I have been informed that, due to my postings, at least 2
manufacturers in france have changed theyre wireless alarm system
receivers and transmitters to "dual frequency" on "dual band" wireless
connections.