Homeowner Forum / Security Alarms / March 2004

Hi guys, tomorrow I am going to have a go at installing an auto dialler to a
friends alarm. The dialler has either normally closed or normally open
connections that go to the alarm panel. Unfortunately Im not sure where
these should go in the panel. The panel is branded as YALE but ...

The group might be interested in some false alarm statistics for our city of
Ottawa here in Ontario, Canada. According to police statistics themselves
(which might well be questionable since they were tabled in City Hall during
an attempt to justify raising the prices of false alarm ...

Dear NG readers
recently i came through an FBII XL2T panel and after i default it, i
programm it to my CS in PID format. The alarm signals from Keypad
panic and from zone alarms was OK. The CS received them OK. I do not

Where can I get programming information for the First Alert FA148CP panel?
I've added several extra motion sensors throughout the house and want to
reorganize two zones, configure a night stay zone, and program the keypad
for one touch arming.

In case any of you new folks were wondering I am the one Bass calls the crook
from Milford.
I am the one he claims ran an unlicensed company. He's been singing this song
for over 4 years so it's lost most of it's comedic value UNTIL................

Just bought a house that has a Ademco Vista 40 System installed in it
and was wondering if anyone knew whether or not this system supports
VOIP phones. I plan to use a voip cable caonnection as my home phone
and want the monitoring to go our over that.

Can somone in the group please confirm to me that the Osbourne-Hoffman
OH-2000 Receiver, PCID reception format conforms to the SIA PCID Standard
exactly as per Doc DC-05-1999.09.
Yours truly

Does anybody know how to program DSC PC2550 regarding zones and door
chime?  I enabled the door chime feature, but whoever set it up has
most of the zones setting it off.  The manual only shows how to enable
or disable the feature.  It is kind of annoying to walk through a room

I'm a person who is fed-up with innocent victims of unprofessional
alarm sellers who hide reality.
NO QUALIFICATION PRE-REQUISIT REQUIRED to be a so called pro..
How less they know, how less they have moral problems to sell

Hi group.
Hope one of you guys can help me out on this one, cause I'm running
mad here.
I have a security video recorderd at work.

I have a CD with .rdb and .60d files recorded from a Security
VideoCam, and I need to convert these file to a regular video format,
or, have a software on my PC that can play these Video files.
Please Help. You can e-mail me at zvi4u@yahoo.com

has anyone had any luck with other modems such as internal modems,
other than Compass's external modem?
Thanks
Rory

I have an Ademco 4130 with a bad communicator PROM.  Also have the
programming instructions (for using a 690 Programmer)  and specific phone
number and subscriber code to put in. I can get the blank PROMs from
multiple sources. I've read the data out of the current PROMs (including ...

have heard that those boys have aquired a central station in Florida.
Does anyone know who they are and which CS it may be?
regards
Ritchib M.

I'm new to this Kantech product and currently in charge with a
project at the local hospital, would anyone please give me some suggestions
on our issue?
There are 7 existing Kantech KT300 panels at the site and we would like