General - Security Alarms

Thread preview

Thread	Last Post	Replies

Ademco 4700 Series Smoke Detector	17 Feb 2004 06:21 GMT	1
I have a client that broke the mounting clips holding their old smoke detector to the ceiling while changing the battery. Does anyone have one laying around? It doesn't have to work, I just need the plastic housings. Thanks
UNRELIABILITY of wireless, look forward to pro's who try..	17 Feb 2004 00:40 GMT	1
Unreliability of wireless, look forward to pro's who try to block your attention under the header: Re: My wireless work great!! 40% less $ then wired! Stupid, it make wireless alarm systems not better.
=> 8bis Complementary information about that so called RFI detection circuit	17 Feb 2004 00:40 GMT	1
I have received following information about that manufacturer unspecified application for RFI detection. >By mister x >Every n seconds/minutes (depending on the product), the transmitter sends a
New Home Build Help Needed	16 Feb 2004 07:43 GMT	60
I'm about to build a new home here in the US, and my builder is going to let me run any low voltage wiring I want. I am planning on building a system byself. From what I gather, a wired system is the way to go since there will be no drywall up.
ITI Commander 2000 Kits	16 Feb 2004 02:21 GMT	1
need to sell 30 full ITI Commander 2000 wireless kits each with 3 learn mode sensors.
Motorcycle alarms	16 Feb 2004 00:15 GMT	2
Hi there, I recently had one of my motocycles stolen:-( To keep from losing another one I need to get an alarm. Does anybody know what I should use as a fool proof alarm for it?
BBB and Robert L. Bass - New Info	16 Feb 2004 00:12 GMT	11
http://www.clearwater.bbb.org/mybindrresults.html Two different address listed: Bass Home Electronics 2291 Pine View Cir
Infinite alarms (Electronics Line)	15 Feb 2004 19:20 GMT	5
Anybody know anything about Infinite alarms? George. Gla. Viktige linker:
To: Frank Olson and Alarminex	15 Feb 2004 09:39 GMT	17
I didn't want to reply in the other thread, "Alarm Industry Union", because I wanted both opinions and didn't want to interject into your running stream with RLB. BUT...
injecting extra power supply onto Paradox sys.	15 Feb 2004 07:52 GMT	19
Need to have more power to run 7 keypads and 9 PIR's on a digiplex sys, as the aux output from the panel is only 700 ma. How is an extra 3 amp power supplies pos. and neg voltage tied in.
DSC 6-zone keypad - defective?	15 Feb 2004 05:20 GMT	30
Problem: Customer can not arm system from one of two keypads. Facts: Two DSC 6-zone keypads in house, installed maybe ten years ago (a guess on my part). Simple system consisting of three or four doors and one or two PIRs.
Vortex Alarm boxes	15 Feb 2004 03:22 GMT	3
I have a ten year old Gardiner Technology 500 series panel and a GT bellbox. I decided to change it all out for some gear from Maplin electronics (BTW - no fault of Maplin's they are a great shop) since I was starting to get some spurious alarms
Ademco Vista-15P - Scheduling Event Beeps	14 Feb 2004 21:17 GMT	11
I have an Ademco Vista-15P security system with the 6160 keypad. Currently, I have programmed scheduling events to arm and disarm the system specific times. Let say that Schedule 1 is set to arm at 12:00AM. About 11:50PM, the keypad begins beeping intermittently (about every 30 ...
replace or augment First Alert home security system	14 Feb 2004 21:13 GMT	4
I just purchased a home with an installed First Alert FA162C security system. I would like a basic system that sounds an audible alert and pages me and my wife. I have no intention of signing up with a monitoring service. Looking around on the net I see almost no trace
Changing/ adding to systems	14 Feb 2004 21:09 GMT	7
ADT installed and monitored my home security alarm. If I want to add something, for example wireless arm/ disarm, is my only option to purchase and have ADT install the addition? Can I install myself? Are there websites that sell security equipment that ADT monitors?