Homeowner Forum / Security Alarms / December 2003

http://www.security-alarm-forum.com/
Whois info for, security-alarm-forum.com:
Registrant:
Genation LLC

To the guy posting to this group about Robert L Bass.
You are starting to get anoying (Not Robert the guy doing this consumer
beware). Why dont you do a post to the group instead of after every post of
his. If anything you are the one with problems. Everyone if their life makes

Just a little note to Tell every one here,there and nowhere
A Merry Christmas
From the french speaking guy in north america,
Petem

Subject: Re: Message to Robert B
From: "Robert L. Bass" robertlbass@comcast.net
Date: 12/31/2002 8:41 PM Eastern Standard Time
Message-id: <YvicnelGJc382o-jXTWc3g@giganews.com>

Can anyone help with this DSC Power 832 problem?  (PC5010 control panel)
Keypad is a LCD5501Z unit.
I powered up the system for the first time last night and was trying to
assign the keypad to a slot.  I was able to enter the installer code

I have a client who is interested in the scramblepad but i am getting no
reply from their sales dept.
Does anyone carry this stuff?
It's cool but if they don't want to sell it then .......

I am wondering if I accidentally disabled a zone from my power dsc832 system via the 5501 panel.
One zone doesn't show up/trip at all anymore.  Is it possible to have removed/blocked a zone via the settings in the panel?  What is a partition, and what is it for in the panel setup? ...

I know, this is another one that has been discussed to death, but still....
I just bought a couple Napco IQ Profiler motions to play with.  I was
skeptical about the quick mount and the quick wire, but its pretty solid.  I
stuck one up in my office and took it down a couple times.  ...

First - THANK YOU to those who replied (both here and privately) to my
plea for contacts at DSC or Tri-Ed... The situation has been resolved
in several ways.

I'm looking into putting 2 security cameras outside my home. Does any
one in here have any suggestions or advice.
TIA

I know this may not be the group to post this in but I know many of you in
addition of security wiring also run other low voltage and communication
wiring. Is there much difference in the cat 5E or cat 6 cable? I'm wiring my
own house and will run a network inside the home. Is there ...

Is there a way to hook a DSC 5010 up to a voice system instead of a siren. I
would like this to audibly announce what zone is in alarm? Thanks
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!

Mike-
I have no idea what others are thinking, but the back- up battery in ANY
alarm system, irregardless of manufacture needs to be changed once a year to
maintain maximum performance in the event of power failure.

I'm moving to Brunei in a couple of months and have been advised to buy
a wireless alarm system to take with me as they're hard to get out
there. I can't use a wired system, because I'll be in rented
accomodation. The sort of specs I think I need are as follows.

An executive was pondering over a hard decision. He had to get
rid of one of his staff. He had narrowed it down to one of two
people, Debra or Jack. It would be a hard decision to make,
as they were both equally qualified and both did excellent