Homeowner Forum / Security Alarms / July 2003

"Robert L. Bass" <robertlbass@comcast.net> wrote in message
news:uFKdnbGcZMCkPLWiXTWJkw@giganews.com...

Hello, it is possible to connect to ranger 7600 with program DL900.  I am
trying to connect but not it with himself.  In the options of panels it only
appears series NX.  thanks

Salutation à vous tous !
  je souhaiterai m'informer sur les différents systèmes d'alarmes.
Aussi je vous sollicite pour me donnée quelques conseille : ce qu'il ne
faut pas oublier , les gadgets inutiles proposer par les agences , etc ...

I picked up a used but very clean looking Burle Pan and Tilt assembly for
not a lot of cash.  I need to find out what the pinout is on the unit
though.   Does anyone have a source for such a thing.  Its a model TC6410A.
TIA

anyone have a site for a 4 input DVR, 30fps, 80 gig HD or higher with motion
detection under $1700
thanx
scott

http://members.cox.net/alarman/gallery.htm
To submit your photo, alarman2000@yahoo.com
js

I'm completely new to home security systems, but I have a bit of technical
ability - so I'd like to install a system in my house. Almost all
doors/windows are pre-wired so it would seem to be a relatively simple
project. No plans to include auto-call features or enter into a ...

I have been ask to install proximity readers on 10 doors within a
corporate office building. Some are exterior doors, others interior.
This is a two-building complex, located across the street (200 feet)
from each other.  Both buildings are very old, but have been recently

   we have been having problems with vandals.  we'd like to catch
them.  it is outdoor away from a power source.  ideally a regular and
/ or infrared camera linked to a motion detector would be best --
anyone know of turnkey systems?

I just received (used) a DSC Power832 unit with an LCD5501Z32-433 keypad and
some wireless motion sensors and door sensors.
I hardwired the keypad but left the phone line disconnected just in case it
tried to dial out with the previous owners details.  I wanted to reset the

I am upgrading my alarm system. I currently have a DSC PC-2550 system
installed with 2 keypads, 6 window sensors, and 4 door sensors.
I am looking for as many of the following features as possible.
Compatible with current wiring.

To all professionals and DIY's. Its imperative to know " Security" requires a
financial investment, and professional planning by seasoned professionals.
Today I had the honor and privledge to go to an ADT customer who bought into
the " two door contacts, one motion and interior ...

Alarm System & Home Automation FAQ
http://www.bass-home.com/faq/masterfaq/faq.htm
Regards,
Robert

I just got one by mistake. Would any one know the  Master code so I can
change it? Will it work on Trans port PC ? Can I flash it to 900 or 950
software? Or is it junk.
Rich

You are hereby notified to cease and desist.  
Your buddies listed below might agree:
Date: Mon, 28 Jul 2003 07:43:00 +0200
From: "G. Morgan" <wacograham@yahoo.com>