| Thread | Last Post | Replies |
|
| Why do they accept the Islam ? | 18 Feb 2008 14:27 GMT | 8 |
Why do they accept the Islam ? Why do they accept the Islam ? NBC NEWS:20000 Americans Convert To ISLAM Each Year! http://www.youtube.com/watch/v/2PS2creVhaM
|
| supporting stack pipe up a wall? | 18 Feb 2008 14:11 GMT | 4 |
I want to run a 3" PVC radon vent up an outside wall. The wall is rough masonry. I suspect I'm not the first to do this, and I expected I could find some sort of bracketry for attaching a pipe like this to a wall. But, to my surprise, I haven't found anything so far. Any clues
|
| painting problem- old house, plaster wall | 18 Feb 2008 12:37 GMT | 4 |
Hi I am painting an old plaster wall in an older home. I have noticed that the wall was painted 8 months ago with a primer and now some areas are completely peeling to the plaster---- I realize this could be calcimine but it could also be a moisture problem... If I put on a
|
| Protecting (and cleaning) chrome | 18 Feb 2008 11:40 GMT | 4 |
I have a glass table with chrome sawhorse legs. I haven't polished them in 20 years. As the table is dismantled I want to take the opportunity to clean them. I'm using Noxon. It is very slow going. It takes a lot of rubbing to get
|
| Drop ceiling/troffers? | 18 Feb 2008 11:21 GMT | 2 |
Picked up some 2x4 troffers off craigslist yesterday, so today I started evaluating exactly how to get rid of the unholy mess that was hiding above my basement's drop ceiling. Drop in light grids with old and busted shop lites above them nailed to the joists, wired up with ...
|
| Tub to shower | 18 Feb 2008 11:21 GMT | 1 |
I'm redoing my bathroom and installing a retrofit shower where the tub was. I had a plumber remove the old plumbing and install and plumb the base (cemented in) for me. Problem is now one wall doesn't line up when I installed the cement
|
| Shower control turns 360 | 18 Feb 2008 07:03 GMT | 5 |
My wife and I just bought a house that is around 30 years old. The master bath tub faucet has three separate control valves/knobs. The middle valve/knob turns the shower head supply off and on. It works, but it does not stop anywhere. You have to turn it round and round
|
| Am I imagining problems with this drywall? | 18 Feb 2008 06:35 GMT | 12 |
I'm having my bathroom redone and I think that one of the walls is not as flat as it should be. Before I ask my contractors to fix it, I would like to make sure that I'm not imagining things. I've uploaded to high resolution images:
|
| What is a Blackberry? | 18 Feb 2008 04:23 GMT | 16 |
What is a Blackberry? No, not the kind you eat..... I know it's some sort of handheld electronic thing, but what is it for?
|
| A valve for this heater | 18 Feb 2008 04:22 GMT | 5 |
A plumber is about to install a Runtal wall heater (neptune) on my wall. Here's the pipes to which he'll attach it: http://freeboundaries.com/heater.jpg I was wondering if there exists a valve that could be attached here.
|
| Garage fluorescent lights | 18 Feb 2008 03:42 GMT | 14 |
Any idea how to determine how many fluorescent light fixtures I need to lit a garage 22'x22'x8'H? I am thinking of getting this: http://www.lightmart.com/index.asp?P...D&ProdID=19062
|
| Cigarette smoke detector | 18 Feb 2008 03:35 GMT | 72 |
In relation to your question of whether a cigarette smoke detector is available, then I can confirm that there are several currently available on the market and we stock one called the Puff Alert Cigarette Smoke Detector. There are two versions available one which
|
| Ice maker stuck on crushed setting | 18 Feb 2008 02:37 GMT | 2 |
The ice maker on my Frigidaire side by side is stuck on the crushed ice setting. I can select cubed ice, but it won't turn off the crusher. It works fine otherwise. It's not exactly a devastating problem, just a little irritating. Thanks for any advice.
|
| $45us/pc H.I.D Conversion Kit | 18 Feb 2008 00:42 GMT | 1 |
100% Customer Satisfaction Guarantee check the quality before you pay In www.housinghouse.com you can check the quality before you pay,The detailed information following: 1) Paypal us the UPS charges before the shipment.
|
| Genie Intellicode garage door problem. | 17 Feb 2008 23:20 GMT | 1 |
Hi, I'm having a problem with my garage door opener. A few weeks ago I had to replaced the carriage assembly, but now I have a new problem. When I pressed the interrupter the door goes down a little bit then stops and goes up just a few inches. If I pressed the
|