| Thread | Last Post | Replies |
|
| Need wireless network camera, easy to use and small | 31 Mar 2007 03:38 GMT | 8 |
Need some advice from some folks who know way more than me. I need a camera to monitor a high crime area on our business property (A large K - 12 school) Crime happens after hhours.
|
| heat imprint cable marker | 31 Mar 2007 00:59 GMT | 2 |
I know these machines have been discussed in this group before, but I can't remember what they're actually called to search for one and to figure out how much they cost. I'm talking about the machines that have a wheel onto which you set, say, "Kitchen speakers" and as you pull ...
|
| best home control network protocol? | 30 Mar 2007 22:59 GMT | 1 |
While looking for a X10 replacement, I found mention of insteon, z-wave, zigbee, etc. Is there one system that integrates a powerline LAN and lighting control system so that
|
| Need help for Engineering Management project | 30 Mar 2007 18:17 GMT | 46 |
I am a sophomore at Vanderbilt University taking a class called Engineering Management 221. Its major focus is the cumulative development of a Technology Strategy Assessment for a frontier-level technology (such as wireless power, OLED, holographic data storage,
|
| Channel Vision whole house DSL filter | 30 Mar 2007 01:54 GMT | 7 |
I bought one of these for the new DSL connection, but I've got a couple of issues. 1) How does one wire up the RJ31 jack? i.e. what wire goes where? I've got an ITI Simon alarm that seems to have four power wires and two
|
| were garage doors jammed for naught? | 28 Mar 2007 02:56 GMT | 3 |
http://www.washingtonpost.com/wp-dyn/content/article/2007/03/26/AR2007032602052_ 2.html http://davehouston.net http://tech.groups.yahoo.com/group/roZetta/ roZetta-subscribe@yahoogroups.com
|
| Ido | 27 Mar 2007 04:09 GMT | 5 |
Does anyone recall Ido's URL?
 Signature Regards, Robert L Bass
|
| Drilling for conduit | 27 Mar 2007 02:18 GMT | 9 |
I'd like to run some 2" flexible conduit from the basement to the second floor (possibly attic). I've already got several smaller holes drilled through the first and second floors in this wall. I've also got two access panels on the 'inside' of this center wall. But a recent ...
|
| Entertainment Door Opener | 26 Mar 2007 23:03 GMT | 2 |
I have a TV inside an entertainment center with doors. I would like a remote door opener that would allow me to open and close the doors. Any help would be appreciated. Jim
|
| Insteon/X10 | 24 Mar 2007 18:55 GMT | 28 |
I had installed X10. It was very flaky in my house. I bought a plug in phase coupler which didn't help much. I have lights going off randomly, some lights unable to controlled etc. Is Insteon going to be much better? I was hoping that the RF was used
|
| X10 Horizontal Blind Control | 24 Mar 2007 06:51 GMT | 1 |
I'm looking for an X10 module of some sort that will control horizontal blinds that tilt via the wand (not the chain). I saw something awhile back, but have been unable to find it again. Several people have suggested a drapery control but those won't do what I
|
| Troubleshooting Channel Vision IR-Over-Coax | 22 Mar 2007 19:56 GMT | 5 |
Hello everyone. I'm looking for some assistance from those of you running an IR-over-coax system in your home. Here's a summary of my setup: I have Cat6 and coax home run from each room in my house back to a rack in my laundry room. I'm routing cable
|
| Switch Module for Complact Fluorescent Bulbs | 22 Mar 2007 18:40 GMT | 8 |
Does anyone know of modules for fully in-outlet-box mounting that has a true switch or relay with open contacts - not a solid state switch. I want to use the new commonly available CF bulbs and have my control modules mounted in the outlet boxes. I am open to consider any HA
|
| Multiple Computer Speakers | 22 Mar 2007 03:57 GMT | 4 |
I have a small business and would like to have music in as many as 8 different rooms. I would like to use one dedicated computer to play MP3 files to computer speakers in each of the rooms so the music can be synchronized. Each computer speaker set is powered and has a small
|
| Active home pro stopped working | 22 Mar 2007 02:03 GMT | 19 |
Well, the x10 tech support phone automated system doesn't work. The customer support phone automated system doesn't work. I couldn't even get a sales person. Wow. This group has been great. Wonder why I even bothered with the company.
|