Homeowner Forum / Construction / February 2006

I am going to be building a 12x24 tackroom on a skid so I can move it later.
I plain on doing the floor framing with 2x6 because we will use it for
holding up to 100 bails of hay, our bails weigh around 100 - 115 lb ea.
My question is, should I do the frame using two 2x6 lagged ...

I would like to make a dining room made with raised panels made out of MDF.
Any suggestions how to do it or how to get started.
Thanks
Jeff

I'm remodelling my  55 yr old Eichler.  It has radiant heat in the
concrete floor.  There seems to be moisture seepage through the
concrete floor.
Pressure testing the heating system shows no problem.  I ran the

Real estate of the future is already  here.
Visit the buildings from the sofa and with background music.
The real estate business gives his first stammerings in the network.
Of static pages merely actual to true photographic albums.

SWMBO and I will be starting a new house build in the next couple of
months, and we will be doing most of the work together.
The Master bedroom suite bath is about 75' from the utility room in the
basement, and we're considering installing a tankless water heater in

I need to insulate an older house in NY. Walls and a floor above a
carport.
I am considering cellulose, glass and foam.
Pro's and Con's?

I'm somewhat familiar with isntalling cedar shingle siding, however
there's one or two aspects that I've never quite been able to get good
clear information about.
#1  On my cedar shake/shingle house,  the shingles just butt right up

http://st911.org --- Scholars for 9/11 Truth --- http://st911.org
http://st911.org --- Scholars for 9/11 Truth --- http://st911.org
http://st911.org --- Scholars for 9/11 Truth --- http://st911.org
Physics Prof Steven Jones from BYU has been convincing hundreds of people

  We have a two family house about 80 years old.
10 Miles West of Boston, Massachusetts.
As usual in the center of the House [front to back] large 10 X 12 Beam
with at least 4 steal columns to support the large beam.

My wife would like me to make a island eating area and would like the
surface to be curved.  Unfortunate I only have a tile saw that will make
straight cuts.  Can anyone recommend a hand held tile saw that can make
these cuts or possibly a jig or way to make them with my current ...

I am a Senior in Civil Engineering at North Carolina State University
and as part of our final project we are designing a 5-story steel
office
building.  As a requirement of the project we are to research

anyone know what that black mess is on the north side of most roofs?
it looksk like black flour was spilt
is this mold? why is it on the north side of roofs
Thanx

We're offering all the latest factory pressed high quality dvd movies,
ps2, psp and xbox silvers with factory printed colour inserts at
fantastic prices, whether for personal use or reselling. We're shipping
worldwide with various shipping methods. For resellers, please contact

i have read in a few in a few places that there is a self leveling
latex you  can poor down before you lay tile.  has anyone used this and
can you give me more information.
a name brand and a url for the product would be helpfull. also is it

Have these metal track inserts that go on each side of old metal frame
windows. Have some, some missing, some broken.
Have no idea about window brand. Some old 3ftx6ft put in several houses in
development.