| Thread | Last Post | Replies |
|
| Irregular Roof w/2 Pitches | 29 Feb 2004 20:51 GMT | 4 |
A friend is planning to put up a sort of out-building on his property. It will be rectangular and have a gable on both ends (short side). However, he wants to put another gable on one of the long sides on a different pitch. Initially, he plans on the main gable roof to be an 8 pitch ...
|
| Delta-FL by the roll | 29 Feb 2004 17:18 GMT | 2 |
Has anyone used the Delta-FL that comes on a roll for a basement floor and then put a laminate directly on it like the two enclosed links say you can? It seems okay to me considering Delta-FL is rated at 6000lbs per square foot. Any thoughts?
|
| Question on installing flooring in non finished attic area | 29 Feb 2004 05:17 GMT | 9 |
We have a huge attice area above our second floor with a set of pull down steps for access. We'd like to put some plywood down for flooring in a portion of it so we can store things up there. However, we don't want to crush the insulation which is a bit thicker than the rafters
|
| Pool removal in California SFBay Area | 29 Feb 2004 02:30 GMT | 4 |
I have a home in Northern California with a in ground pool that we would like to remove. Does anybody know how difficult it is to do it and how much does it cost. Is this a "possible" DIY project. Your opinions are much appreciated.
|
| This darn door. | 28 Feb 2004 16:04 GMT | 10 |
I wish to buld a deck outside our upstairs bedroom. I am told that I need a 34X82 rough opening for the door we want. I don't have that much height. Is it permissible to cut 2 or 3 inches off the bottom of the door and frame? Tks
|
| drywall handles? | 28 Feb 2004 05:21 GMT | 6 |
I'm looking for an easy way to carry drywall from my truck into my house. My wife can't provide much help because of a back injury, and so I'm having to do it and carrying the stuff by hand sucks canal water. I've seen of a handle that you can get for carrying the panels, but ...
|
| Wagner 2000? | 28 Feb 2004 05:21 GMT | 5 |
Someone lent m wife and I a Wagner 2000 paint sprayer, but we have no instructions on how to use it and don't know what the knob on the back does. Does anyone out there have experience with this sprayer, and can you tell me if there are any gotchas?
|
| Real Architect 2004 for AutoCAD LT | 28 Feb 2004 00:34 GMT | 2 |
Real Archtect 2004 Real Architect 2004, is the newest version of our architectural drafting program for AutoCAD LT. It works with LT2000 through LT2004. This powerful and easy to use program adds right on to AutoCAD LT without
|
| Bollards! | 27 Feb 2004 22:59 GMT | 9 |
Hi I posted a request about stopping cars parking on my driveway and found this site for UK people and was abble to buy a simple bollard for £35. I can recommend them. www.mybollards.com Andrew
|
| Owner Builder | 27 Feb 2004 22:36 GMT | 5 |
How difficult is it to get you General Contractors license in SC?
|
| Trimming Yews | 27 Feb 2004 13:33 GMT | 8 |
I have two yew bushes that are getting out of hand. When should I trim them back? I want to really get them down a lot.
|
| Ontario Ministry of Environment report on cca deck | 27 Feb 2004 12:02 GMT | 3 |
I am sure that you all remember me telling you the story of a family from Ottawa who became ill after their cca deck was installed. Here is the news link to that story. http://www.ctv.ca/servlet/ArticleNews/story/CTVNews/1058548950874_69/?hub=SciTech
|
| Douglas Fir Door finishing | 27 Feb 2004 06:52 GMT | 1 |
Looking for some advice on how and what to finish 8 new doors with. I have heard that Sealer and Laquer are the usual way. I do not want to stain them. What do you folks like?
|
| Builders Show 2004 | 27 Feb 2004 06:14 GMT | 2 |
Anyone here going to the builders show in Vegas next week. I'm leaving Sunday.......
|
| FA: LaserPlane Laser Level L-130 - Excellent Condition! | 27 Feb 2004 02:50 GMT | 7 |
LaserPlane Laser Level L-130 Like new - EXCELLENT Condition - Works Perfectly Comes with Heavy Duty tripod & Extras http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2596927965&category=42298
|