You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: Remote Control Switch
| Klm | 29 Feb 2004 16:51 |
>> In industrial controls there are limit switches. >> [quoted text clipped - 9 lines] >was not clear from the specific page whether or not they are, but it is >a good start. There is no remote control. You turn the lights on (or off) with the garage door movement at a preset (limit) position.
The switch actuator is entirely mechanical. Mount the switch on (or next to) the garage door track so that the edge of the door, or a raised bump somewhere on the door will depress the lever. The roller on the lever is to prevent snagging. There are also versions with a plain lever and no roller.
>I don't want a switch that is mounted outside though, I'm >looking for a wireless remote speciically. From a quick glance, their >product looks like a switch that is wired and mounted outdoors.... ... The switch is weatherproof and I believe proof against sparking combustible gasses. It can be mounted anywhere.
|
| Rob Gray | 29 Feb 2004 11:00 |
>>I pursued this angle at a few garage door dealers, but >>they said that this use was not a feasible use of their equipment. [quoted text clipped - 7 lines] > The switch lever with the roller can be installed at and activated at > any position by the garage door. Cool site, thanks... I'll have to dig into the specs at their site more to confirm that these switches are wireless and remote though. To me it was not clear from the specific page whether or not they are, but it is a good start. I don't want a switch that is mounted outside though, I'm looking for a wireless remote speciically. From a quick glance, their product looks like a switch that is wired and mounted outdoors.... ... Thanks again!
|
| Klm | 29 Feb 2004 07:46 |
>I pursued this angle at a few garage door dealers, but >they said that this use was not a feasible use of their equipment. In industrial controls there are limit switches.
See Eaton Electrical Limit Switches at http://www.eatonelectrical.com/NASApp/cs/ContentServer?pagename=C-H/Common/Asset TemplateLink&c=Apubarticles&cid=986495728774&Sec=products to get an idea what they look like.
The switch lever with the roller can be installed at and activated at any position by the garage door.
|
| Rob Gray | 29 Feb 2004 06:48 |
I have asked this question to a newsgroup or two in the past with no luck, but I figure with technology changing, maybe I'll get lucky now.
I have lights mounted on the outside of my house just below the roofline (2 story house with attic). I guess these would be called flood lights since they light up the yard from their mount on the house. There is one wall switch inside the house that turns on these lights. The thing is that often the time you need these lights the most is when you drive up to the house at night (house is in the country, so unless there is a bright moon, there is no other light source except these lights).
What I am looking for is a wireless remote control wall light switch. In the past when I asked this question, some people have noted that they thought that a garage door remote could be modified for this use (since garage door remotes often can turn on the door opener and/or a garage light switch). I pursued this angle at a few garage door dealers, but they said that this use was not a feasible use of their equipment. A motion detector light is not feasible either since these lights are all on one circuit and there are about 10 lights around the house.
Does anyone know of a company that sells a wireless remote control wall light switch? Such a solution would work great since the remote control unit could be kept in the car and the lights could be switched on when needed and then simply turned off using he wall switch when the house has been entered.
Thank in advance for any advice.
Rob
|
Quick links: