Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsGeneralRural LivingHome AutomationSecurity AlarmsConstructionRepairPlumbingCleaningPest ControlLawn and Garden

Homeowner Forum / Construction / May 2006



Tip: Looking for answers? Try searching our database.

Hosts?  Any cheap rigs?

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Les - 29 May 2006 16:19 GMT
I'm going to be building a house and was wondering if anyone is aware of any low cost hoists or some sort of rig like that for getting materials up to a second story easily.  This might be as simple as some kind of a wench with motor and rigging.  It does have to support much more than a couple of hundred pounds.  I'm obviously not needing anything like a crane.
Glenn - 29 May 2006 16:30 GMT
The only rig we had for that circumstance was a strong back and a
weak mind helped somewhat.  (Actually considerably)

> I'm going to be building a house and was wondering if
> anyone is aware of any low cost hoists or some sort of
[quoted text clipped - 7 lines]
> ------=  Binary Usenet downloading made easy =---------
> -=  Get GrabIt for free from http://www.shemes.com/  =-
jack - 29 May 2006 16:50 GMT
You cannot go wrong renting a "LULL." This rig is widely used in the
construction industry and can move about in tight spaces and lift
plywood,shingles,studs,etc. in a safe and efficient manner. Takes ten
minutes of training to run it. If your project is only one house then I
would suggest you just use your back and a good ladder!
Nehmo Sergheyev - 29 May 2006 17:49 GMT
jack
> If your project is only one house then I
> would suggest you just use your back and a good ladder!

Carrying materials up a ladder, although I'm guilty doing my share of
it, is not safe. The guy on top pulls the stuff up with a rope. Smaller
things can go in a bucket. A pulley and rope is better yet. And a
motorized winch, as OP suggested to himself, would be better than that.

--           (||)  Nehmo  (||)
RicodJour - 29 May 2006 17:13 GMT
> I'm going to be building a house and was wondering if anyone is aware of any low cost hoists or some sort of rig like that for getting materials up to a second story easily.  This might be as simple as some kind of a wench with motor and rigging.  It does have to support much more than a couple of hundred pounds.  I'm obviously not needing anything like a crane.

There are numerous sites that have training manuals online for rigging.
http://www.tpub.com/content/construction/14251/css/14251_179.htm

Google hoisting rigging gin pole.

R
marson - 29 May 2006 22:00 GMT
on a two story house it's worth it to build the stairs as soon as the
second floor is framed, even if you use tempory stringers.  think of
all the trips up and down a ladder you will save.  also, does your
lumber yard have a boom truck?  they can boom materials straight onto
the deck.  after i have a second floor decked, i have all the second
floor materials and the roof sheathing boomed onto the second floor.
in one job with a tight stairway, the same crane that lifted our
trusses also boomed the drywall up there.
JerryD(upstateNY) - 30 May 2006 13:11 GMT
I have no idea what materials you want to use a hoist for.
Plywood, 2x4's, 2x10's, ect can be handed up to the second story easily.
You will spend more time trying to lift 2x4's up to the second floor than it
is worth.
The only problem is getting trusses up on top of the second story walls.
I have left out an end wall so they could be handed up from the ground to
the second floor and then to the top of the second floor walls.
After all the trusses are up, you build and stand up the last wall.
Or maybe onto the garage roof and then onto the second floor walls.
Whichever way works the best.

Signature

JerryD(upstateNY)

"I'm going to be building a house and was wondering if anyone is aware of
any low cost hoists or some sort of rig like that for getting materials up
to a second story easily.  This might be as simple as some kind of a wench
with motor and rigging.  It does have to support much more than a couple of
hundred pounds.  I'm obviously not needing anything like a crane.

nailshooter41@aol.com - 30 May 2006 18:34 GMT
Watch this about the Laddervator.  There are >>several<< varients that
are in use today.  We used to use one for shingles and plywood hoisting
to second story roofs.

http://www.burrowsmoving.com/hoist.html

Robert
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.